Tag Archives: Machine Tool Encyclopedia

Turn-mill Machining
Method

What Is The Turn-mill Machining

The most attractive part of the turning and milling machine tool machininging platform is that it can complete the machining of the workpiece after a set-up and commissioning. At present, the development of CAM software has enabled turning-milling machine tools...

Advantages-Of-Wafer-Stamping
Method

Advantages Of Wafer Stamping

Technical parameters of wafer stamping machine: Thickness: 0.5mm to 2.0mm; Width: 600mm to 1580mm Wafers: 200 to 630 The coil plate is directly on the machine; finished product: no scratches, burr within 2C; Roll weight: maximum 16T, two kinds of...

Use And Maintenance Of Turret Punch Mold
Technical Column

Use And Maintenance Of Turret Punch Mold

The hardened mold can be sharpened in the usual manner. Surface hardening will reduce the wear of the mold when punching stainless steel plates, but it will not extend its service life. Proper lubrication, timely sharpening, and operation in accordance...

pitong
Material

Preparation process of high-strength beryllium bronze wire

Beryllium bronze is a typical age-hardened alloy. It has a series of advantages such as high elasticity, high strength, high conductivity, corrosion resistance, fatigue resistance, small elastic hysteresis, non-magnetism, and no sparks when impacted. prospect. In this paper, high-strength beryllium...