The 850 machining center will have deviations during operation, why is this? That is because the 850 machining center itself has guide rail errors, fixture errors and homework table errors, etc., so there is inevitably deviations in accuracy, and in the processing process, processing The process and quality requirements are different, so how should we avoid the deviation of the 850 machining center?
The 850 machining center will have deviations during operation, why is this? That is because the 850 machining center itself has guide rail errors, fixture errors and homework table errors, etc., so there is inevitably deviations in accuracy, and in the processing process, processing The process and quality requirements are different, so how should we avoid the deviation of the 850 machining center?
1.optimize the process path of the 850 machining center
The process road of the 850 machining center has a direct impact on the utilization rate, processing accuracy and economic type.On the premise of ensuring accuracy, the output power is improved, so that the process is gathered, the road is the shortest, the empty journey and the auxiliary time are the least, which also reduces the outbreak Errors in distance ensure azimuth accuracy.
2. improve the level of induction of 850 machining center planning and operators
Planners select reasonable processing roads, tools and application sequences according to the types of parts, differentiating factors, control the sequence of processing procedures and working steps, determine cutting parameters and process parameters, and finally formulate reasonable and high-quality processing standards; operators To pass the professional training and education, check and pass to be able to get on the job, you must have further education and quality knowledge, better than summing up experience, able to clean up the shortcomings.
3, optimize the programming of the 850 machining center
When processing multiple workpieces of different shapes, it is necessary to complete multiple non-different sequence actions, and it is possible to complete multiple processing with only one pattern, simplifying the development of the pattern and improving the power; using the dry running function to verify the correctness of the tool path, After entering the model into the 850 machining center, install the tool or workpiece, and drive the dry run.At this time, the spindle does not rotate, and the homework desk actively runs, so that you can check whether the visiting tool will collide with the workpiece or fixture; in the 850 machining center. The reference point must be set, and the homework coordinate system must be consistent with the programming, and the tool length compensation must be set correctly, otherwise the shortcomings of bumps will erupt.
