What do you need to do after the CNC lathe is finished?
The machine tool industry generally regards the number of axes as the standard for CNC lathes, low gears below three axes, middle to high grades from three to five axes, and high grades above five axes. For industry, the sign of the difference between traditional and modern production equipment is traditional machine tools and CNC machine tools, which has become an industry consensus. The intelligent and automatic machine bed machine is the direction of the machine tool industry. Its high precision, high precision, high speed, flexibility and intelligence are the signs of modern industry. The modern equipment industry is developing towards extreme manufacturing. First, it is getting taller, second, it is getting smaller, and third, it is more and more complicated. The production process is highly integrated.
The work to be done by the CNC lathe after the operation is completed can not be ignored, specifically:
- 1. Remove chips and wipe the machine tool, keep the machine tool and the environment clean.
- 2. Pay attention to check or replace the oil wiper on the damaged machine tool guide rail.
- 3. Check the status of lubricating oil and coolant, add or replace in time.
- 4. Turn off the power and the main power on the operation panel of the machine in turn.
- 5. It is strictly forbidden to knock, correct and correct the workpiece on the chuck or between the chucks. The workpiece and the tool must be clamped before proceeding to the next step.
- 6. When changing the tool, work piece, adjusting work piece or leaving the machine, the machine must be stopped.
- 7. The insurance and safety protection device on the machine tool, the operator shall not disassemble and move arbitrarily.
- 8. Machine tool accessories, measuring tools, and tools should be properly kept and kept intact and good.
- 9. Clean the machine in time, keep it clean, move the tailstock and carriage to the end of the bed, and cut off the power of the machine.
- 10. It is strictly forbidden to modify the machine parameters. You must notify the device administrator if necessary, and ask the device administrator to modify it.
- 11. Understand the technical requirements of the parts, check the blank size and shape for defects.
