Other

How about Taiwan’s new generation CNC system machining center

1. How about Taiwan’s new generation CNC system machining center

Taiwan’s new generation CNC system is favored by many customers in China. In the industry, we generally believe that imported CNC systems have the best performance, domestic CNC systems are suitable for low-end machines, and Taiwan CNC systems are more cost-effective. Many CNC systems in Taiwan have good performance and moderate prices. New generation CNC systems belong to this category. Is this the case with Taiwan’s new-generation CNC system machining center?

What system a machining center uses affects not only its price but also its performance, which is what we often say about cost performance. However, the cost performance is not absolute. Some machining centers have relatively high requirements on the CNC system. At this time, it is not appropriate to use the CNC system with high cost performance in our eyes, or a machining center that does not have much demand on the CNC system is used well. CNC system, so it has little practical use in addition to adding costs to itself. Taiwan’s new generation CNC system machining center also depends on the type of machining center. Some machining centers with the new generation system can reduce costs and can maximize the performance of this machining center. Some are not satisfied by the new generation system. Taiwan’s new generation system has a high cost performance, so most of the machining centers using the Taiwan’s new generation system have good performance. For example, our VMC650 machining center from Taicheng is one of them.

2. Features of VMC650 machining center using Taiwan’s new generation CNC system

VMC650 is a high-rigidity, high-stability, high-efficiency and high-precision machining center developed by Taicheng for small hardware parts and products. This model comes standard with Taiwan’s new generation CNC system. Since this VMC650 is mainly used for small hardware parts and products, the use of Taiwan’s new generation CNC system is fully enough to give full play to the maximum performance of this machining center. If you are using some imported CNC systems such as Siemens, FANUC, Mitsubishi and other systems will be slightly overkill, even if these high-performance CNC systems are used, they will not be able to maximize the value of these CNC systems. Moreover, the price of these CNC systems is relatively expensive, which will reduce the cost-effective advantage of this VMC650 machining center.

In general, most of Taiwan’s new generation CNC system machining centers are still good. If you have a need for ptj CNC system machining center, please contact us at ptj CNC, we will serve you wholeheartedly.

Leave a Reply