The thimble is a kind of mold accessory, which is mainly composed of a thimble and a thimble. You must know that mold accessories are indispensable and indispensable for today’s stores that produce hardware products. The importance of thimbles is also self-evident. Due to the frequent use of thimble barrels and the harsh environment, even high-quality thimble barrels will inevitably be damaged. Therefore, we must do a good job of maintenance in order to give full play to its role, the following will take you to understand how to do its maintenance.
1. Do a good job of anti-rust lubrication
Although the thimble tube was in production, the manufacturer had sprayed rust inhibitor to prevent rust. However, if it is left unused for a long period of time during use, it will be prone to rust, which will inevitably affect the user’s experience of using a thimble tube, and because the product is damaged, it will have to be replaced by a replacement method, which will reduce work efficiency. . It can be seen that paying attention to rust prevention and lubrication is a critical step.
2.Perform daily demagnetization maintenance
When the thimble tube is used for a long time, it will inevitably have some magnetism. At this time, demagnetization must be performed. The reason for this is to ensure that it will not be magnetic and cause material blocking. In particular, the most professional ejector cylinders also need to pay attention to the usual maintenance and maintenance, so as to avoid the occurrence of large problems and the enlargement of small problems.
3.Polish and inspect maintenance status at any time
The most important point for the maintenance of the thimble is the daily polishing. The main purpose is to polish the sticky aluminum and carbon deposits in time. The main purpose of this is to reduce the wear on the ejector cylinder. At the same time, it is also necessary to monitor the maintenance status of the ejector barrel at any time, pay attention to the storage location, and avoid the loss of parts.
In general, not only the ejector cylinder needs maintenance, but also any other equipment and machinery. Maintaining it in the correct way can ensure a good effect when used, and also help to extend the service life and reduce costs. Then as long as the above three points are achieved, the thimble barrel can be protected from damage to a greater extent.
