Method

3D printed ships have many advantages. The earliest handmade boats can be traced back to ancient times, and new manufacturing techniques have emerged along the history of continuous evolution. From manual to automatic processing, each ship can be produced in...

Introduction: We believe that the future of making these materials and robots with more biological similarities will depend on the composition of the materials. This raises a point of view on the importance of interdisciplinary research in this field. In...

High-strength Steel Stamping Mold Today's high-strength steel and ultra-high-strength steel have achieved the lightweight of vehicles and improved the collision strength and safety performance of vehicles. Therefore, they have become an important development direction of automotive steel. However, as the...

The analysis of  CNC machining Japan  technology involves a wide range of aspects, so we only analyze the possibility and convenience of CNC machining here. (1) The size data on the part drawing should conform to the principle of programming...

Industrial aluminum profiles will produce a lot of waste water during surface treatment, and there are certain harmful substances in the wastewater to be discharged. If it is not treated, it will have a certain impact on the environment. What...

Cast aluminum is a process in which molten aluminum is poured into a mold and cooled to form aluminum parts of the desired shape. Castings obtained by casting aluminum are called aluminum castings. During the casting process of aluminum castings,...

The compound aluminum foil is pasted on the pasting machine. The pasting machine is equipped with an unwinding shaft for aluminum foil and paper (or plastic film) and a rewinding shaft for the composite aluminum foil, a tray for holding...

At 10:43 am on April 17, 2018, Eastern Time, Southwest Airlines Flight 1380 took off from New York LaGuardia Airport (LGA) for Dallas. However, I am afraid that the five crew members and 143 passengers on the entire plane will...

1. Poor machining accuracy of parts Generally, it is because the feed dynamics between the axes are not adjusted according to the error during installation and adjustment, or the drive chain of each axis of the machine tool has changed...

The CNC machining center is a machine tool that must be used for mold processing. So what do we need to pay attention to when processing molds? Today, we will follow Taicheng CNC editor to understand what we should pay...