Other

What is a horizontal machining center?

The horizontal machining center is a machining center in which the table and the spindle are set in a flat manner. The horizontal machining center generally has 3 linear motion coordinate axes plus 1 table rotation axis. The horizontal machining center can select different tools according to the program after clamping the workpiece at one time, automatically change the speed of the spindle, and process multiple surfaces and multiple processes one by one according to the order of programming. This type of machining center is the most suitable for processing. Box parts.

The following machine tool editor introduces the key to using horizontal machining center.

Environment in which horizontal machining center is installed

The horizontal machining center should be installed in a place away from the source of the earthquake, avoiding sunlight, no heat radiation and no humidity. If there is an earthquake source near the place where the horizontal machining center is installed, anti-vibration trenches should be provided around the horizontal machining center. If the anti-vibration groove is not installed, it will directly affect the processing accuracy and stability of the horizontal machining center. Over time, it will affect the poor contact of the electrical components, causing malfunctions and affecting the stability of the horizontal machining center.

Strict control of current and voltage

Horizontal machining centers are usually placed in the processing workshop, and there are many machine tool equipment in the processing workshop, which causes more or less power fluctuations. Therefore, the installation position of the horizontal machining center must strictly control the current and voltage of the voltage. The current and voltage of the power supply must be controlled within the allowable range of the horizontal machining center. The current and voltage of the electric source must be stable, otherwise it will directly Affect the normal work of horizontal machining center.

Temperature difference and humidity will directly affect the horizontal machining center

The horizontal machining center is normally operated in an environment not exceeding 30 degrees Celsius. Normally, the power distribution cabinet of the horizontal machining center is equipped with exhaust fans and refrigerators to ensure the electronic parts and the central processor. Operate under constant temperature. If the temperature and humidity are too high, the life of the components of the control system will be shortened, and the failure of the horizontal machining center will increase for no reason. If the humidity increases, dust will increase on the integrated circuit chip, which will directly cause faults such as poor contact and short circuit.

Machine tool factory parameter settings

When operating the horizontal machining center, the user cannot modify the original basic parameters of the machining center arbitrarily. Because those original factory parameters directly affect the dynamic characteristics of each component of the horizontal machining center, only the gap compensation parameter value can be set according to the actual situation. set. If you want to modify the factory setting parameters, you should contact the manufacturer, and modify the factory basic parameters under the guidance of the manufacturer’s professionals.

Leave a Reply