Our Blog

How does the expert deal with the abnormal current alarm of the cnc machining center (the HCAL red light is on), the following are the experiences and methods The 185V AC of the servo unit is rectified to become DC

At this stage, the key tasks of China's CNC machine tool enterprises are to accelerate the transformation of economic development mode, vigorously implement technological innovation, promote product structure adjustment, speed up research and development, master the core technology of several

As China becomes a large CNC machining country, the technical requirements for machining centers are becoming higher and higher, and the machining centers are not as unfamiliar as in the early stages of imported processing. There are more and more

In order to further improve the accuracy of the vertical machining center in metal cutting, in addition to ensuring the geometric accuracy and good structural characteristics of the CNC machine tool manufacturing, it can be achieved by reducing the error

1. The origin of the workpiece coordinate system set by the programmer during programming should be outside the workpiece blank, at least on the workpiece surface. Under normal circumstances, the origin of the workpiece coordinate system can be shot anywhere,

1. Shutdown 2. Press the "emergency stop" button on the control panel to disconnect the servo power; 3. Disconnect the CNC power supply; 4. Disconnect the power supply of the machine tool. Way selection The working mode of the machine

How much is a cnc machining center? I often see customers searching for this problem. They are all customers who need to buy a machining center. Many customers are very touched when consulting us. They are usually engaged in machining

The so-called vertical machining center reference point, also known as the origin or zero point, is the point where the mechanical origin and electrical origin of the machine tool coincide, and is the mechanically fixed point after the origin is

1. Measured by the movement quality characteristics of the machine tool, it is a failure of the machine tool movement characteristics. In this case, although the machine tool can run normally, it can not process qualified workpieces. For example, the