Category: Other

Trouble phenomenon: A CNC machine tool equipped with FANUC OMC, model XH754, when the rotary table is indexed, it will move obviously and fall loudly. Analysis and processing process: when the turntable is indexed, the shift is obvious when it

Trouble phenomenon: A CNC machine with model XH754 supporting FANUC OMC, the turntable is not allowed to return to zero, and the worktable is skewed after returning to zero. Analysis and treatment process: This kind of failure is generally caused

A CNC lathe uses the FANUC 0 TB system. The fault phenomenon is: when the tool change command is input, the turret tool change rotates continuously without any alarm. The rotation command has the following functions: ① can judge the

What should I do if the 401 # alarm appears on the CNC lathe? A CNC lathe uses FANUC 0 TD system. This CNC lathe has a 401 # alarm for a period of time. First, check whether the servo

What should I do if an alarm appears after the CNC machining center is stopped? The CNC machining center uses the FANUC 18 system. When it is stopped and restarted, an alarm of insufficient preparation sometimes appears. First of all,

A TK6411A CNC horizontal boring and milling machine, the CNC system is SIEMENSSINUMERIK 802D, in the mold addition, several times in a row after the completion of the execution ~ section of the program z axis exit preparations to continue

TK6411A CNC horizontal boring and milling machine, the CNC system is SIEMENSSINUMERIK 802D. When turning on the reference point once, the CNC machine tool alarm: 20002 channel 1 axis X1 zero reference point mark is not established. Check the 802D

Failure phenomenon of the machining center: the spindle is noisy. When the spindle is not loaded, the load meter indicates more than 40 ‰. Analysis and processing process: first check the spindle parameter settings, including the amplifier model, motor model

Failure phenomenon of the machining center: During the working process of the machine tool, the mechanically shifted sliding gear in the spindle box is automatically disengaged, and the spindle stops. Analysis and processing process: The main transmission of the transmission

Malfunction phenomenon of the machining center: After the gearbox shifting instruction is issued, the spindle is in a state of rocking back and forth at a slow speed, and the gear has not been engaged. Analysis and processing process: In