Our Blog

Polyetheretherketone (peek resin) is a high-temperature thermoplastic with a high glass transition temperature (143 ° C) and melting point (334 ° C). The heat-transformation temperature under load is as high as 316 ° C (30% glass fiber). Or carbon fiber

Biomedical materials are high-tech industries with the most interdisciplinary and knowledge-intensive industries, including metals, polymer materials, and composite materials. Among them, medical polymer materials are the earliest developed, most widely used, and most widely used materials in biomedical materials. A

What Is PPS Material PPS is a white powder with an average molecular weight of 0.4-0.5 thousand and a density of 1.3-1.8 grams per cubic centimeter. It has very intentional thermal properties. The glass fiber reinforced thermal performance index is

Common plastic raw materials for injection molding: ABS, PP, PVC, PC,PPS. Common materials commonly used in molds: yellow card materials, P20, 718, 738, S136. Generally, the basic requirements for injection mold materials are as follows. 1. Easy to process Injection

There is no comparable, there are hundreds of stainless steel grades, depending on which one Beryllium copper is a copper alloy with beryllium as the main alloying element, also known as beryllium bronze. It is a high-grade elastic material with

Although China has few copper reserves , China is still the world's second largest copper producer by now. Peru  jump from the third copper producer in the world to the second. After Las Bambas was put into production, the annual

Copper plate Copper plate is a high-stability, low-maintenance roofing and curtain wall material. It is environmentally friendly, safe to use, easy to process, and extremely resistant to corrosion. Aluminum bronze, tin bronze, silicon bronze, beryllium bronze, copper, brass, white copper,

The Define Of Bakelite The chemical name of bakelite is phenolic plastic, which is the first variety of plastics to be put into industrial production. Phenolic and aldehyde compounds can be prepared by polycondensation reaction under the action of acidic

Performance and use of tool steel T7, T7A sub-eutectoid steel. Has good plasticity, toughness and strength, and a certain hardness, can withstand shock and impact loads, but poor cutting ability. Used to manufacture tools that are not subject to impact

The electromagnetic furnace uses electromagnetic induction heating technology to melt and reprocess metals (magnesium, aluminum, zinc alloys); Our company has comprehensively developed and manufactured zinc alloy electromagnetic furnace series products and special accessories; the existing electromagnetic central melting furnace and