CNC Lathe 401 # Alarm Solution
What should I do if the 401 # alarm appears on the CNC lathe? A CNC lathe uses FANUC 0 TD system. This CNC lathe has a 401 # alarm for a period of time. First, check whether the servo
What to do if an alarm appears after the CNC machining center is stopped and restarted
What should I do if an alarm appears after the CNC machining center is stopped? The CNC machining center uses the FANUC 18 system. When it is stopped and restarted, an alarm of insufficient preparation sometimes appears. First of all,
CNC screen boring and milling machine screen display alarm how to do
A TK6411A CNC horizontal boring and milling machine, the CNC system is SIEMENSSINUMERIK 802D, in the mold addition, several times in a row after the completion of the execution ~ section of the program z axis exit preparations to continue
The solution to the alarm of CNC horizontal boring and milling machine
TK6411A CNC horizontal boring and milling machine, the CNC system is SIEMENSSINUMERIK 802D. When turning on the reference point once, the CNC machine tool alarm: 20002 channel 1 axis X1 zero reference point mark is not established. Check the 802D
Maintenance of the noise in the spindle of the machining center
Failure phenomenon of the machining center: the spindle is noisy. When the spindle is not loaded, the load meter indicates more than 40 ‰. Analysis and processing process: first check the spindle parameter settings, including the amplifier model, motor model
Malfunction Maintenance of Spindle Stop Caused by Shifting and Sliding Gears of Machining Center
Failure phenomenon of the machining center: During the working process of the machine tool, the mechanically shifted sliding gear in the spindle box is automatically disengaged, and the spindle stops. Analysis and processing process: The main transmission of the transmission
Failure Repair of Machining Center Can’t Gear
Malfunction phenomenon of the machining center: After the gearbox shifting instruction is issued, the spindle is in a state of rocking back and forth at a slow speed, and the gear has not been engaged. Analysis and processing process: In
FANUC machining center CRT display 414 # alarm
FANUC machining center CRT displays 414 # alarm. The alarm message is: SERVO ALARM: X －－－ AXIS DETECTION SYSTEM ERROR At the same time, the LED alarm display code of the servo drive unit lights up [8]. Fault analysis and
2011 # and 2014 # alarms occurred during the tool change process of the turret tool post
During FANUC CNC lathe turret tool post, 2011 # and 2014 # alarms appear during the tool change process. Fault analysis and processing The 2011 # alarm indicates that the turret is faulty, and the 2014 # alarm indicates that
Trouble repair of tool change failure in machining center
Trouble phenomenon: A CNC machine with model XHAD765 supporting OKUMA OSP700 system. During the tool change, the manipulator did not pull out the spindle tool, and then the alarm 2873 "exchange arm pullout detector abnormal" was displayed, and the spindle
